10.0.0.1 Login — What, How, and Troubleshoot

To login to the admin panel of your router, you can use this IP address 10.0.0.1. Some people by mistake type it as 10.0.0.0.1 which will open an invalid webpage.10.0.0.1 is used to access the Admin Panel of the router and belongs to the private class of the IP addresses. It is set to default by the router manufacturer. To change the settings of the router, you need to login into the Admin Panel. In your Web Browser type 10.0.0.1 Admin Login or 10.0.0.1 Login to know how to access the Admin Panel of your router.

Steps to log in to 10.0.0.1

By using the default username & the default password log in to 10.0.01 then, access the settings of the router. Here is the quick guide to login to 10.0.0.1:

1. Open the web browser you use.
2. Type http://10.0.0.1 or 10.0.0.1 in the address bar.
3. Be careful that you Don’t enter 10.0.0.0.1 as such an IP address doesn’t exist.
4. Type the default username and password on the login page of your router’s manufacturer.
5. You will be logged in to the Admin Panel of your router if you have entered the correct username and password.

Having issues accessing 10.0.0.1?

In case, you are facing issues in accessing 10.0.0.1 please check;

• Look for the correct gateway address and try again.
• Sometimes, the default gateway address of your router is other than 10.0.0.1 which results in the browser not accessing the Admin Panel.
• Some common mistakes like typing www.10.0.0.1.com, adding https:// at the beginning, mistaking “0” (zero) for an “O” or typing 10.0.0.0.1 results in an invalid gateway address.
• Restarting your WiFi network and router is the easiest way of fixing it. Wait for a few minutes before reconnecting to your network.
• Make sure that you can browse other websites.
• Ensure that you clear all the cache from your browser.
• Try resetting your gateway to factory default settings, because that may cause some misconfiguration in your previous session.
• Unplug your router power.
• For 10 seconds, press and hold the“reset” button at the back of your router.
• The modem has successfully reset if you see the lights at the front of the router blinking.

Tip: In case, all previous methods didn’t work as this is not the same as “restart” because this will change all your manual settings. Reset should be your last option.

Wrapping Up!

By using 10.0.0.1 Login or 10.0.0.1 Admin Login, you can easily assess the Admin Panel of your router. Just a few above-mentioned points need to be kept in mind while typing 10.0.0.1 in the address bar of your web browser. Avoid any typing error and you are all set to go. Still got some error, call us on our toll-free number, get your issue resolved in no time.

Visit Us: https://10001ip.com/